How Much Does It Cost To Repair A Power Window Motor

Power windows make it like shooting fish in a barrel to open up windows in all parts of the car. Broken ability windows, all the same, are non so nice, especially if they become stuck in hot or cold weather. Luckily, power windows are usually one of the more than reliable systems on a late-model machine, and diagnosis and repair is ordinarily pretty straightforward. If the switch becomes broken, you volition either need to repair it or replace it. Fortunately, making a power window repair is usually a simple DIY project that you can practise by following the steps beneath.

Tools You'll Demand

Screwdriver
Flat-tipped screwdriver
Multimeter or Voltmeter/Ohmmeter

Notice the Problem

Locate the fuse box, usually nether the dashboard most the steering wheel, and check for blown fuses. Replace any blown fuses, and check for loose wires coming in and out of the fuse box. Tighten the loose wires and come across if the windows are working now.

If only the window on 1 side isn't working, the problem could be a nonfunctional switch. It's too possible that in that location's a problem with the window'south motor, or at that place could exist faulty wiring leading from the switch to the motor. Since there tin can be many reasons why a power window doesn't piece of work, it's important to inspect the unabridged apparatus thoroughly to identify the exact problem.

Examine the Switch

Switches for passenger windows are wired to the switches on the commuter's side. If at that place is a problem with the passenger windows, it could exist an result with either the switches on the passenger windows, or the ones located on the driver's side.

Remove the Switch

There are a total of 4 tabs on each of the window switches. Each of these four tabs will have to be released to remove the switch. A lot of circumspection should be used when releasing the tabs,they're extremely sensitive and tin pause hands. Use a flat-tipped screwdriver and slide it under two of the tabs, then release them with a quick motion. Every bit a note, some vehicles may crave that you remove the console to get access to the switch.

Bank check if the Switch Works

Bank check the contacts of the switches with the multimeter. If in that location is loftier resistance on the switches, information technology could be because dirt has settled on them. If this is the case, simply cleaning the contacts tin solve the consequence. Once the contacts have been cleaned, put the switch back on the associates by re-inserting the tabs.

Re-Examine The Switch

Once the switch has been reinstalled, check to run across if it functions normally again. Push the switch and meet if the windows are working again.If the windows are working and so you probably don't take to do anything else. If the problem persists, the switch will probably need to be replaced.

Installing a New Switch

Earlier installing the new switch check to make certain the contacts are clean. There shouldn't exist whatsoever kind of dirt, debris, or rust on the contacts. Once the new switch passes inspection, remove the old switch and supersede it with the new one. Be careful to spike the tabs properly. Check the windows by rolling them up and downward. If the windows are nevertheless non working the issue could be faulty wiring. If that'due south the case, it volition require further checking, and is probably best done by a car mechanic.